There are many maintenance items for
Huaquan generators, and there are also many things to pay attention to. Let's take a look at what needs attention:
1. The curvature of the carbon brush must conform to the surface of the collector ring, otherwise it must be ground.
2. The main parts such as rotors, end covers, bases, collector rings, carbon brush groups, etc. must be placed gently to avoid deformation due to impact.
3. The removed parts must be properly stored in containers, and they must not be lost or thrown away at will.
4. When removing the bearings, the bearings and bearing cover parts must be properly covered with clean paper. Do not let dust fly in. If there is dust on them, all grease must be replaced.
5. After the motor is installed, first gently turn the rotor by hand to check whether there is any friction sound or inflexible rotation.
6. The removed wire ends should be marked and connected one by one in the original position when reinstalled. Never connect them wrongly.
7. The end cover screws and pole screws must be screwed in crosswise at the same time. Do not tighten one first and then tighten the others.
The above are the precautions you need to pay attention to when repairing Huaquan generators. For more information:
http://www.fadianjisos.com/